*Reduced lifting capacity over 12 m span.
CONHOIST’s runway rails are mounted in brackets on the scaffolding. These rails are mounted using Ø48.3 tubes that fit all standard couplings. The bridge, spanning up to 20 meters, runs along the rails using two trolleys.
With 25 metres of line, CONHOIST can be configured to lift loads from street level directly onto material towers or roof surfaces.
CONHOIST can be operated in all 3 Dimensions using a handheld, wireless remote.
CONHOIST is battery-powered and can be charged using a rail-mounted docking station.
CONHOIST can handle loads from the loading tower to the assembly site.
Stepless bridge length from 5 m to 20 m span.
Traverse configuration
Two rails are mounted on each side of the scaffolding.
Two trolleys run on the rails and hold a bridge (trolley rail) of up to 20 metres.
In this configuration, Conhoist can cover the entire roof or construction site.
Mono configuration
Conhoist runs directly on the rail.
A limitless number of rails can be mounted in series to create the desired runway.
Ideal for lifting materials from the ground to the roof. For example, it can also be mounted along facades and lift facade elements
